The Oil Tool
|
|
|
The Oil Tool |
|
 |
HOW IT WORKS - No technician would knowingly mix five quarts of clean oil with one quart of dirty oil. That is the standard oil change because of oil carryover. Up to 1/2 to 3/4 quart of used oil remains in an engine after a normal change oil change. Reinventing
the Oil Change. During an Engine Clean oil service with the Oil Tool, the old oil filter is removed and the
engine oil is drained. The OIL TOOL is then connected to the oil filter
housing with a spin on adapter. Air is injected into the oil galleys and the
old oil is flushed from the engine. Now
that the old oil is removed from the engine and to
prevent dry starts, a quart of new oil is poured into the OIL TOOL canister
and it is air injected into the oil galleys. A new filter is installed and
the engine is filled to the proper level. If
your customers are searching for ways to reduce operating costs and enhance
engine performance the OIL TOOL should be part of their normal oil change
procedure.
|
||||||
|
Worldwide Sales Office and Manufacturing Plant: 5112 Heintz St. Baldwin Park, CA. USA -- Phone 626-814-3969 -- Fax 626-814-8738 |
